Wincor Nixdorf BA73R, Operating Manual

Page: 9 / 50

Safety Instructions
3 BA73R LCD Display – Operating Manual 01750140681 F
Safety Instructions
This device conforms to the corresponding safety regulations for
information technology devices, including electronic office machines for
use in the office environment.

If the device is moved from a cold environment to a warmer room
where it is to be operated, condensation could occur. The device
must be completely dry before being put into operation. Therefore an
acclimatization time of at least two hours should be accounted for.

Lay all cables and supply lines so that nobody can tread on them or
trip over them.

Data cables should neither be connected nor removed during
electrical storms.

Protect the device from vibrations, dust, moisture and heat, and only
transport the device in its original packaging (to protect it against
impact and blows).

Take care to ensure that no foreign objects (e.g. paper clips) or
liquids can get into the inside of the device, as this could cause
electrical shocks or short circuits.

In case of emergencies (e.g. damaged housing, liquid or foreign
objects getting into the device), the device should be switched off
immediately, the mains plug of the BEETLE or PC should be
removed, and the Wincor Nixdorf customer service should be
contacted.

If the LCD display element is broken and the liquid crystal solution
leaks out of the display and onto your hands, clothing etc, wash your
hands or clothing immediately with soap or alcohol, holding them
under running water for at least 15 minutes. If the liquid comes into
contact with your eyes, please consult a doctor immediately.

Generally you should connect IT-devices only to power supply
systems with separately guided protective earth conductor (PE),