Wincomm WTP-8866-15, User Manual

Page: 19 / 63

19
Installing System Software
Recent releases of operating systems from major vendors include
setup programs, which load automatically and guide you through
hard disk preparation and operating system installation. The
guidelines below will help you determine the steps necessary to
install your operating system on the Panel PC hard drive.
NOTE:
Some distributors and system integrators
may have already pre-installed system
software prior to shipment of your Panel PC.
Installing software requires an installed HDD. Software can be
loaded in the WTP-8866-15/19DPLUS Panel PC using any of below
methods:
Method 1: Use the Ethernet
You can use the Ethernet port to download software from the
net to the HDD that has been pre-installed in
WTP-8866-15/19DPLUS Panel PC
Method 2: Use the COM Port
By connecting another PC to the WTP-8866-15/19DPLUS Panel
PC with an appropriate cable, you can use transmission
software to transmit Operation System Software to the HDD
that has been pre-installed in the WTP-8866-15/19DPLUS Panel
PC.
Method 3: Use a External CD-ROM
In order to boot up system from USB-CD/DVD drive, please
connect USB-CD/DVD drive, turn on computer power, keep on
pressing “F11” key, go into BIOS quick boot menu, select
“USB-CD ROM”, WAIT FOR 20 SECONDS, then press enter,
system OS will boot up from USB-CD/DVD drive directly