Winco vero Owner'S Operation And Maintenance Manual Download Page 12

Copyright 2016, WINCO MFG., LLC

12

SWING-ARM OPERATION: 

(Attendant ONLY) 

(OPTIONAL FEATURE)

ATTENDANT OPERATING INSTRUCTIONS

Attendant should be positioned on the RIGHT or LEFT side of chair

1.  TO OPEN: Press down on red latch handle to unlock Swing-Arm.

WARNING:

 

• 

Do NOT leave occupant unattended with either or both swing-
arms unlatched.

• 

Do NOT transport chair with swing-arms unlatched unless it is an 
Emergency situation.

2.  TO CLOSE: Push Swing-Arm fi rmly against frame.

Latch will automatically engage with an audible "click".

WARNING:

 

• 

Make sure swing-arm latches are properly engaged when swing-
arms are in the closed (latched) position.

Test by pulling on arms. The arms should not swing open if properly 
engaged.

180° SWING-ARM OPTION:

This chair option provides swing-arms that pivot up to 180°. When both 
arms are pivoted fully back, chair width is reduced to allow the chair to be 
more easily transported through narrow doorways. In addition, swing-arm 
can be pivoted back in order to get a wheel chair or gurney alongside the 
chair. (See pg. 12)

3.  Unlock both swing-arms and rotate them towards the back of the 

chair.

4.  Stand behind the chair and use the back or push handle (if equipped) 

to maneuver the chair through the doorway. 

IMPORTANT:

 

• 

Transport occupant with chair arms in the open position in 
emergency situations only. This should only be performed by an 
attendant.

WARNING:

 

• 

Do NOT recline chair with either/both swing-arms in the 180° 
position.

• 

Ensure that both swing-arms are in the closed (latched) posi-
tion at all times, unless the patient is being transferred or directly 
supervised.

2

1

4

3

Summary of Contents for vero























Reviews: