CLEANING:
•
With system disconnected from power source, use a
DAMP CLOTH ONLY
to clean switch, wiring
or power pack (located under seat frame).
TROUBLESHOOTING:
•
If there is no heat or massage or flashing light on the switch - check power cord connections to
wall outlet
AND
connection of power cord to power pack unit under chair.
•
If switch displays a flashing light, disconnect from wall, check all accessible wire connectors
under chair for possible loose connections, then re-plug into wall and test again.
•
If system still does not work contact Winco customer service: 1-800-237-3377.
CORD STORAGE:
For models with Heat (HT) or Heat & Massage (HM)
To prevent tripping on cord, damage to cord, or
damage to recliner, the power cord should be
coiled and stored in the "Hook & Loop" fastener
provided
BEFORE
moving chair or whenever
Heat / Heat & Massage is not in use (as shown).
Page 25 of 32
Document No.: 006344
Revision: I
OWNERS OPERATING & MAINTENANCE MANUAL
VERŌ CARE CLINER
HEAT / HEAT & MASSAGE OPERATION - CONTINUED
Summary of Contents for Vero Care Cliner
Page 2: ......