Page 4 of 12
Document No.: IM TMA227-15
Revision: A
TMM PUSH HANDLE
FIELD INSTALLATION AND USAGE INSTRUCTIONS
IMPORTANT NOTES ABOUT THIS MANUAL
This Field Installation and Usage Instruction document is designed to assist you with the installation of the
TransMotion by Winco product. Read this document thoroughly before using the equipment or performing service
or maintenance. If you are unable to understand the warnings, cautions, or instructions, contact Winco Customer
Service before attempting to operate or service the equipment, otherwise injury or damage may result.
To assure safe operation of this device, it is essential that methods and procedures be established for educating
and training staff on the safe and effective operation of the product.
Winco, Mfg., LLC reserves the right to change specifications without notice.
The information contained in this document is subject to change without notice.
Specifications listed are nominal and may vary slightly from unit to unit due to tolerance variations or power supply
variations.
Photographs and illustrations contained within this document may not depict exactly the model you have. This
document can cover many closely related models.
SPECIAL NOTES - SIGNAL WORDS
Signal words are used in this manual and apply to hazards which could result in injury or property damage. The
following is a definition of those signal words as used in this document:
I
ndicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices or potential property damage hazards.
Provides important information, makes special instructions clearer, or provides service personnel
information to make maintenance easier.