Document No.: OM TMM5 SERIES
Revision: V
Page 23 of 30
“A” OPTION: AC POWER (for on-board batteries and charger)
AC power cord for charging batteries is attached to
chair base, and may be stowed by wrapping around
storage bracket.
To charge on-board batteries:
1. Insert AC plug into wall outlet.
To prevent insufficient power, plug chair in to charge
batteries overnight (i.e. during off-times), or 24 hours
prior to service.
When the chair is plugged in and charging the pendant
will not illuminate, even when the buttons are pushed.
If chair is to be stored or not in use for more than 1.5
weeks, leave chair plugged into an AC wall outlet or
unplug battery pack from control box.
To unplug battery pack; lift up base cover to access
control box, remove control box cover by unlocking
mechanism using a flathead and then sliding the cover
off to access the plugs. Then unplug the battery pack
cord shown.