background image

OWNERS OPERATING & MAINTENANCE MANUAL

STRETCHAIR

®

 BARIATRIC STRETCHER-CHAIR

Page 24 of 32

Document No.: 006328 
Revision: S

COPYRIGHT © 2021 WINCO MFG., LLC

GENERAL CARE & CLEANING

• 

Periodically inspect tightness of all screws, bolts, nuts, or other fasteners every year.

• 

Lubricate pivot points on back, seat, and legrest pivot points with a lubricant approved by your facility 
every year.

Winco Mfg., LLC’s full-line of products are durable and reliable when properly cared for.  

All Winco products should be:

1. 

Cleaned

2.  Disinfected (per facility policy)

3.  Rinsed

4.  Allowed to air dry

Note: Disinfecting a product is not the same as cleaning the product. Disinfectants alone will not provide adequate 
cleaning. They do not have grease or oil cutting properties to remove grime, hair, or skin oils. The appearance, 
feel, and performance of your upholstery may diminish if not cleaned properly.

Winco chairs should be cleaned with mild soap and water solution and a damp cloth on a regular basis. Avoid 
harsh detergents or chemicals that could damage the upholstery or finish of your chair. If the upholstery is 
disinfected with chemicals or bleach mixtures, the chair 

MUST

 be wiped off using only clean water on a damp cloth 

and then air dried. Failure to rinse upholstery with clean water can result in build-up of residue. Over time residue  
can dry out the upholstery and cause changes to the look and feel of the upholstery, leading to cracking.

Please refer to instruction labels or tags included with your product for complete care and cleaning instructions. 
Retain information on the label or tag for future use.

Additional information for cleaning products with Winco Mfg., LLC's selection of vinyls can be found on our 
suppliers website at: https://spradlingvinyl.com/resource-library.

For custom vinyl, please refer to the manufacturer’s instructions.

Use caution cleaning in and around moving parts. Keep hands clear of pinch points and 
metal edges or injury may occur. Disconnect power cord and battery before cleaning 
this product. NEVER clean or maintain your chair while it is occupied or injury may occur. 
Do not allow any liquid to penetrate electrical components. NEVER use a high pressure 
cleaner, wash tunnel, or "hose down" method to clean this product. Liquid may cause 
damage to the product and void your warranty.  

Cleaning

Summary of Contents for S550 Bariatric Stretchair

































Reviews: