6
CLEANING & MAINTENANCE
1. Remove the locking pin.
2. Lift handle into upright position and remove the blade
holder assembly.
3. Unscrew the knob from the blade holder assembly and slide
out the blade.
1. Follow steps 1-2 for removing the blade
2. Bring the handle back down into lower position.
3. Place the pin key into opening of can opener where the gear
is located.
4. While holding the pin key in place, turn the handle
counterclockwise until parts have been loosen and can be
removed.
1. Wash the can opener parts using warm soapy water. Do not
allow components to soak.
2. Thoroughly dry can opener parts using a dry cloth or paper
towel.
3. Coat the blade and gear with light non-sticking vegetable oil
to prevent rusting when the can opener is not in use.
The can opener must be cleaned daily or after each extended use. Regular maintenance will help prevent
unwanted build-up and harmful bacteria growth.
REMOVING THE BLADE
REMOVING THE GEAR
CLEANING
Note: The blade of this opener may be reversed for double
wear but should not be reshaped. A worn blade can cause
metal slivers. Never resharpen the blade. Replace blade
when it no longer cuts smoothly or when the can skips
against the gear.
Note: At the first sign of wear, blade must be replaced with
a new factory blade to ensure safe and optimal operation.
Do not attempt to sharpen old blade to reuse.