Winco Caremor Cliner Series Customer Instructions Download Page 3

Page: 3 / 4

Page 3 of 4

006170

Revision P Date 01-28-11

JWC

IMPORTANT

Remove the wooden brace from back frame

before using chair

Wrinkles in Vinyl –

Storage and shipping can cause wrinkles of the vinyl on your Winco chair. This is normal.

Please allow 1-2 weeks at room temperature (approx. 70 degrees) to allow for vinyl to expand back to original
appearance.

ptional Release Handle Mounting location:

Tools Needed:

Phillips Screwdriver & Flat Screwdriver

1. Use Phillips screwdriver & remove the Release Lever

and screw from the Push Handle.

2. Use Phillips screwdriver & remove the rear screw that

attaches rear of left Side Panel.

3. Use flat screwdriver & remove left Armrest, and then

insert the included flat-head screw into hole with
countersink located on metal arm plate.

4. Route the Release Lever between the Side Panel and

Frame as shown in photo above.

5. Use flat screwdriver & thread flat-head screw into the

Release Lever and tighten.

6. Re-install

Armrest.

7. Re-attach rear of Side Panel.
8. Install the included plastic “Split-Stem Cap” in the

empty hole on the Push Handle.

Summary of Contents for Caremor Cliner Series

Page 1: ...uture reference and training 5351 5361 Caremor Cliner CUSTOMER INSTRUCTIONS No Tools required for standard assembly Install the Back 1 After checking your product for any shipping damage put chair in...

Page 2: ...your chair Once this change is made the User can control their own recline position by squeezing the handle under the left Upholstered Arm of the chair NOTE The attendant can still operate the chair h...

Page 3: ...Screwdriver 1 Use Phillips screwdriver remove the Release Lever and screw from the Push Handle 2 Use Phillips screwdriver remove the rear screw that attaches rear of left Side Panel 3 Use flat screwdr...

Page 4: ...006170 Revision P Date 01 28 11 JWC Visit our website www wincomfg com product documents parts lists for a complete parts list catalog of your chair or call Customer Service 1 800 237 3377 to request...