Winco 653 Owners Operating & Maintenance Manual Download Page 9 | Manualshive

Page: 9 / 16

Winco 653 Owners Operating & Maintenance Manual Download Page 9

656 PREMIER CARE CLINER

Seat Height ............................20”
Seat Width...............................21”
Back Width .............................21”
Overall Height .....................46.5”

Maximum Weight Capacity.... 275 lbs.

Overall Width .....................30.5”
Back Height Above Seat.........30”
Seat Depth...........................19.5”
Weight ...............................93 lbs.

694-695 SWING-ARM CARE CLINER (694 shown)

Seat Height .............................21”
Seat Width ......694=21” 695=25"
Back Width .....694=21” 695=25"
Overall Height ......................48.5”

Maximum Weight Capacity.... 694=275 lbs. 695=450 lbs.

Overall Width ....694=34” 695=38"
Back Height Above Seat.......32.5”
Seat Depth...............................20”
Weight 694=104 lbs. 695=127 lbs.

Seat Height ............................21”
Seat Width...............................21”
Back Width .............................21”
Overall Height ........................49”
Overall Width .......................33”

Maximum Weight Capacity.... 275 lbs.

Back Height Above Seat......31.5”
Seat Depth..............................20”
Drop Arm Height To Floor.......21”
Weight .............................105 lbs.

655 DROP-ARM CARE CLINER

PARTS LIST / SPECIFICATIONS

8

NOTE:
653-655-656-690-694 Model Chairs have one Gas Spring.
654-657-691-695 (XL) Model Chairs have two Gas Springs.

«
...
7
8
9
10
11
...
»

Summary of Contents for 653

















Reviews:

No comments