manualshive.com logo in svg

Winco 5X00, Owner'S Operating And Maintenance Manual

Share
Download
Winco 5X00 Owner'S Operating And Maintenance Manual Download Page 27

Page 27 of 44

Document No.: 006344 
Revision: J

OWNERS OPERATING & MAINTENANCE MANUAL

VERŌ CARE CLINER

Copyright © 2020 Winco Mfg., LLC

RECLINE WHILE IN THE SEATED POSITION (NON POWER RECLINER MODELS ONLY)

OPERATING INSTRUCTIONS: OCCUPANT

MANUAL ADJUSTMENT AND GAS BACK CHAIRS

1. 

While seated in the chair, with 

ALL

 four (4) casters 

locked, place hands on each chair arm and push 
back while applying pressure to the back with 
shoulders, to activate the mechanism into the 
desired position.

1. 

To operate the infinite back positioning, lock ALL four 
(4) casters, pull back on the recline lever and adjust 
the upholstered back angle by pushing back with 
your body until desired angle has been reached. 

2. 

Release the recline lever (A) when you have 
achieved the desired angle to lock the back into 
position.

•  DO NOT

 stand or sit on the leg rest.

•  DO NOT

 place hands, legs, or feet under seat, mid-

ottoman, or leg rest. 

•  Stay clear of recline mechanism when operating chair.

1

1

INFINITE GAS SPRING ADJUSTMENT

Summary of Contents for 5X00













































Reviews:

No comments

Brands by name

Popular brands

Load more brands