Winbook N7405JV, Instruction Manual, Page: 13 / 22

- 10 -
Wireless Network List box. Select one of them and tick “Using Wireless Lan”, then the
relevant data of the selected wireless network will be shown in the adjacent fields. Enter
the “Share Key” access password and click “Set”, the WiFi access configuration is now
complete.
Figure 14
Note1: When the device is connected both WiFi and wired networks, it will firstly try to
connect to the wired network, if it doesn’t succeed, it will then try to connect to the
WiFi. The IP address and port for both wireless and wired network are the same.
Note2: Before you configure a wireless network as shown above; please make sure the
camera is connected to the network via a network cable. After configuration succeeds,
please reboot the camera and the wireless function takes effect.
5.1.3 ADSL Setting
User can enable ADSL Dialup according to the Figure 15 below (the ADSL provider will
assign a user name and password to you when you apply for ADSL service.) Connect the
camera directly to the ADSL modem and it is then connected to the Internet.
Figure 15
5.1.4 UPnP Setting
If you enable UPNP, once the IP camera is connected to the LAN, it will communicate with
the LAN router and set up port-forwarding automatically.
In Figure 16 below, tick “Using UPNP to Map Port” and the setting is complete. You can
check if the UPNP works or not in the System Maintenance interface.