Microphone mute
Press the
MUTE
key. The display will show “
MIC. MUTED
”
Press the
MUTE
key to enable the microphone again.
Holding Calls
Exclusive Hold
With call in progress
1. Press
R
2. Hear new internal dial tone
3. Dial
##
4. Press
the
key, to place the handset on hook
Retrieve Call
1. Press
the
key, to take the handset off hook
2. Dial
##
3. Converse
4. Press
the
key, to place the handset on hook
Transferring Calls
During a call transfer it is always possible to return to the original call by pressing the
R
key.
Screened Transfer
With call in progress
1. Press
R
2. Hear new internal dial tone
3. Dial internal extension number
4. Announce
call
5. Press
the
key, to complete the transfer and place the handset on hook
Unscreened/Blind Transfer
With call in progress
1. Press
R
2. Hear new internal dial tone
3. Dial internal extension number
4. Press
the
key, to complete the transfer and place the handset on hook
Transfer via Paging
With call in progress
1. Press
R
2. Hear new internal dial tone
3. Dial
#6
4. Enter paging zone (00=All Page, or 01-32 for specific group)
5. Announce call over page
6. Wait for page answer
7. Press
the
key, to complete the transfer and place the handset on hook
Trunk-To-Trunk (Transfer to Outside Line)
With call in progress
1. Press
R
2. Hear new internal dial tone
3. Dial Trunk Group Access Code (i.e. 9)
4. Enter the number to be dialed.
5. Announce
Call
6. Press
the
key, to complete the transfer and place the handset on hook