9
From this screen click on Voice/Trunk/IP Trunk
10
The following screen will appear with blanks.
Page 1: ...Broadvox Provisioning and will be in Word format You will not be able to proceed with the setup without this document 1 Make sure you have a computer that is configured for the same physical segment as the eNet660S The default IP address for the server is 192 168 1 200 with a subnet mask of 255 255 255 0 Therefore your computer must be assigned an IP address on the same physical segment An example...
Page 2: ...9 From this screen click on Voice Trunk IP Trunk 10 The following screen will appear with blanks ...
Page 3: ...t the bottom of the page 14 At this point your IP trunks should be provisioned and ready to go 15 Make sure that Broadvox has provisioned the trunks and that they are active 16 Next place an outgoing test call If this call is successful then place an incoming test call If this call is successful then everything is good and no other effort is required 17 Should either of the above fail and the prob...
