Washbasin fitting
SanTec SKY
19
EN
SKY
Configuring the functions
‘ON’ position:
Automatic program enabled.
‘OFF’ position:
Manual program enabled.
Serves to disable the fitting prior to cleaning.
‘ON’ position:
Cleaning stop function enabled.
‘OFF’ position:
Cleaning stop function disabled (default setting).
Flushing mode:
DIP switch 1
Cleaning stop:
DIP switch 2
ON
OFF
2 3 4 5 6
1
ON
OFF
2 3 4 5 6
1
Enable cleaning stop
Touch the metal outlet before
water flows starts and tip
on the sensor ring until the
water flow stops. (approx.
5 x in 2 s). The water flow
stops and the cleaning stop is
enabled.
Disable cleaning stop
3 min. after leaving the active
range the fitting switches into
normal mode.
To instantly end cleaning stop,
perform the same steps as
used for ‘Enable
cleaning stop’.
5 x
um 07:00 Uhr
