18 Shower paneel
WimTec PROOF P4
EN
PROOF P4
Assembly
1
2
3
5
6
1.
Mark the centre line and upper edge of the panel on the
wall.
2.
Attach the self-adhesive drilling template.
Drill 3x Ø 8-mm holes and insert dowels.
3.
Attach mounting bracket using the screws and washers.
4.
Screw in the hanger screw.
5.
Insert the basket filter into the 90° angled connector and
attach locking pin at the top.
6.
Seal off the angled connector by attaching the locking
pin and screw the connector into the inlets, aligning the
locking pins towards the inside at an angle as indicated.
ATTENTION!
Perform the following steps
in the order indicated!
!
4