WimTec NSIDE, Installation And Operating Instructions Manual, Page: 12 / 24

12 Urinal control WimTec INSIDE
EN
INSIDE
General notes
Congratulations on purchasing your urinal control
WimTec INSIDE.
Delivery scope:
Siphon with integrated sensor, control electronics and
magnetic valve.
Important installation notes:
For urinals with a level urinal outlet at the back. Urinals with a
vertical siphon e.g. Laufen Taro Nova only with siphon adaptor.
To avoid rinsing out of cleaning agents inside the cermic a central
water shut-of resp. power off for the urinals should be provided
on site.
Mounting and installation may only be performed by a quali-
fied service provider in accordance with DIN 1988, ÖVE/ÖNORM
E8001 and VDE 0100 Part 701. When planning and installing
sanitary facilities, all relevant local, national and inter-national
standards and provisions must be observed!
Make the feeder by a 2-pin main switch with minimum 3 mm
connection opening and protect with maximum 6 A!
Bei der Planung und Errichtung von Sanitäranlagen sind die
entsprechenden örtlichen, nationalen und internationalen Nor-
men und Vorschriften zu beachten!
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!