FRONT PANEL CONTROLS
(7) Noise gate Level (R19)
(8) Noise Gate Delay (R20)
(9) Mic Gain LED (LED2)
This slide pot. works only when the noise gate is on. This pot.
sets the level at which background noise will be not gated to the
audio output. Pushing this control up will make the unit less
sensitive to higher background ambient noise. Pushing this
control down will make the unit, more sensitive to background
noise.
This control adjusts the length of time audio will be gated to the
output after the noise gate has automatically turned off (Noise gate
LED off). Pushing the delay slide pot. up increases the delay
(decay) time. Pushing the pot. down decreases the delay time.
This LED is used to help adjust the MIC In Gain pot. When the
LED goes on this indicates that the EQ is being overdriven.
This LED should never go on.
-9-
-20-
PRELIMINAR
Y
EQUALIZERSETTINGS
