1.1 Assembly
1. Insert the two buttons.
2. Insert the board with the antenna socket
in advance. Then slide the board down so
that the USB socket is inserted into the
housing.
3. Insert the spacer.
4. Insert the GPS module.
5. Install the battery and fold the cable one
time to the left of the battery.
6. Slide the cover from below. Place the
groove on the bottom of the unit.
www.wimo.com
- 5- ©Taner Schenker
No effort is required for the assembly! All components can be used very easily. If
something is difficult, please check the cause and do not try with "violence" to protect
the parts from damage!