WiMAX SWU-3120 User Manual Download

Page: 30 / 30

RF EXPOSURE INFORMATION

Your

WIMAX USB Modem

is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits

for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These

limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines

are based on standards that were developed by independent scientific organizations through periodic and thorough evaluate on

of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless

of age and health.

The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the device transmitting at its highest certified power

level in all tested frequency bands. The SAR tests are performed in several positions and locations as required by the FCC. The

highest SAR value for this device is

0.7

W/k

. While there may be differences between the SAR levels of various positions, they

all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this device with all

reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information of this device is on file with the FCC and can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC ID :

V7MSWU-3120.

Near-Body Operation

To maintain compliance with FCC RF exposure requirements, maintain a

0.5

cm, separation distance between the user's body

and this device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and receiver.

–

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–

Consult the dealer or an experienced radio/TV technical for help.

WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may

cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the

authority to operate this equipment if an unauthorized change or modification is made.

This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may cause undesirable operation.