13
INSTRUCTIONS MANUAL
INSTRUCTIES EN HANDLEIDING - BEDIENUNGSANLEITUNG - MANUALE D’ISTRUZIONI - MANEL D'INSTRUCTIONS - MANUAL DE INSTRUCCIONES
LED AND FUNCTIONS
Introduction
If the system is under tension led
@
is illuminated. Fill the bathtub with warm water (the
ideal temperature is 37/38°C) approximately 10 cm. over the lateral jets. If the water level
is sufficient led
@@
will not be illuminated anymore. When the bathtub is empty you can
only activate the blower.
Function hydromassage pump
Press the key WATERPUMP ON/OFF
@@
to activate the pump. The pump functions only
with enough water in the bathtub. To deactivate the pump press again the key
@@
.
Function blower
Press the key BLOWER ON/OFF
@@
to activate the blower. When the pump is
functioning you can regulate the airflow towards the jets; turn the operating knob to the
left for more air and to the right for less air. If you activate the blower with an empty
bathtub it can blow dry the tubes of the air system for 1 minute. To dry the tubes you
have to wait 15 minutes after emptying the bathtub. To deactivate the blower press
again the key
@@
.
Function spotlight
Like the water pump the spotlight functions only with enough water in the bathtub (led
@@
is not illuminated). To switch on the spotlight press the key SPOTLIGHT ON/OFF
@@
.
As an option it is possible to order chromo therapy.
water pump on/off
if illuminated indicates presence of tension
if illuminated indicates water level in the bathtub NOT sufficient
if NOT illuminated indicates water level in the bathtub sufficient
blower on/off
spotlight on/off
Operating knob: air regulation jets
Istruzioni
Duolight
05-04-2004
09:11
Pagina
13