WilTec CHF-1216 Operation Manual Download Page 5

  

© by WilTec Wildanger Technik GmbH  

 

Seite 11  

http://www.WilTec.de 
http://www.aoyue.eu 
http://www.teichtip.de 

 

D: Specifications 
 

Input Voltage 220-240 VAC 
 
Charging current/ 
Output voltage 

CTF1208/CHF1208 
CTF1216/CHF12/16 
CTF3603/CHF3603 
CTF4803/CHF4803 

6V/1,5A,12V / 2A,12V/8A 
6V/2A,12V/2A,12V/10A 
12V/2A,12V/12,8A,  
12V/2A,12V/15A,24V/7 

 
 
In addition to the battery types and capacity detailed in the specifications the charger is only suitable 
with the following: 
 

-

 

Charging only one a single battery at anytime. 

-

 

Charging rechargeable lead acid or gel batteries with 6 cells 

-

 

Charging rechargeable lead acid, gel agm or calcium batteries with 6 cells 

 

WARNING:

 Not suitable for charging non- rechargeable batteries 

 
The supply cord cannot be replaced, if the cord is damaged the charger should be scrapped. 
 

Caution:

 The charger is not for use by any person (including children) with reduced physical, sensory 

or medical capabilities or lack of experience of knowledge. 
The (CTF1208/CHF1208, CTF1216/CHF1216, CTF3606/CHF3606, CTF4803/CHF4803) are fully 
automatic battery chargers.  
 
It automatically adjusts the charge rate applied as the battery charges.  
 
Charging stops when the battery is fully charged. 
 

 

 

Summary of Contents for CHF-1216







Reviews: