https://www.XPOtool.com
Item 99200–99202, 99204–99207, 99209, 99210
Page 7
The Tool Experts
09 2022-1
№
Instruction/name
1
Dismount spark plug.
2
Adjust electrode.
1
Oil drain screw
2
Oil filler
3
Max. oil level
Clean the fuel tank every 100
hours of operation. For this, the tank should be taken from the holder and
rinsed. The fuel filter should periodically be cleaned.
If the engine shall be stored for long periods of time, the fuel tank shall be completely emptied and the
carburettor emptied on his discharge screw. The engine oil should be discharged when the engine is
hot, but switched off. Then re-fill new oil. The engine should be completely cleaned of dirt from the
outside. The air filter and spark plug should be checked again and replaced or cleaned if necessary.
The combustion chamber should be filled with some motor oil when the spark plug is unscrewed so that
the combustion chamber is not oxidised. After that, the engine may be stored in a dry storage place.
Torques
Part
Nm (value)
200
270–420
Cylinder head screw
29±3
48±3
Crankshaft case screws
25±3
25±3
Connecting rod bolt
14±1
16±1
Fly wheel screws
80–90
120–140
Spark plug
20
Spark plug gap
(
㎜
)
0,7–0,8
(0,028–0,031
in)
Valve clearance (cold)
(
㎜
)
I : 0,10 ± 0,15
EX: 0,15 ± 0,20
.
. mm
( .
. in)
