WilTec 92672, User Manual

Page: 7 / 11

© by WilTec Wildanger Technik GmbH Item 92672–92679, 92684–92687 Page 7
http://www.WilTec.de
http://www.aoyue.eu 02 2022 -1
http://www.teichtip.de
Starting the motor
Attention!
You should put on a protective equipment before starting the motor (hearing protection, gloves).
1. Put the fuel valve (1) to the “ON” position.
2. Push the choke lever (2) to the “CLOSE” position. When performing a warm start, closing the
throttle is not necessary.
3. Slide the throttle lever a bit to the left side.
№ Name № Name
1 Engine switch 3 Starter rope handle
2 Electric start type
4. Start the motor as follows:
a) Hand starter:
Put the engine switch to the “ON” position. Slightly pull the starter rope handle upwards until you feel
that it resists, then pull rapidly.
Attention!
Should you let go the handle suddenly, it might hit the motor. Instead, allow the starter rope to slide back
slowly.