Storage for longer periods
Please follow these steps if you want to store the engine for a longer period:
1. Run the machine for three minutes and then stop the machine.
2. Drain away the lubricant before the engine becomes cool and refill new machine oil.
3. Disassemble the rubber plug on the cover of rocker shaft and then fill about 2 cc lubricant into
it and return the plug to its position.
4.
RECOIL-START TYPE:
Push down and keep the decompression lever at the non-compres-
sion point and then pull the recoil starter two or three times.
FOR MOTOR-DRIVEN START:
Keep the decompression lever at non-compression point and
let the engine rotate for two or three seconds with the start key switch on “start” position (do
not run the engine).
5. Pull up the decompression lever and pull out recoil starter slowly until the resistance is felt by
your hand (i. e. at the point of compression stroke, where the intake and exhaust valves are
closed, which can prevent engine from rust).
6. Clean out machine oil and dirt from the engine, and to put the engine at a dry place.
© by WilTec Wildanger Technik GmbH
Item 92454
Page 22
http://www.WilTec.de
http://www.aoyue.eu
12 2020-1