Safety precautions
Please follow the following tips and ideas for your own safety, otherwise damage to the equipment or
operator’s injury may occur.
Make sure that the engine is only operated in well-
ventilated environments, otherwise a health risk may
occur because of the fumes.
In other persons’ vicinity, the engine has to work with
due diligence. Make sure that the exhaust pipe is free
and accessible; it must not be covered or blocked.
Before filling the tank with fuel, the engine must always
be switched off.
The tank must not be overfilled.
If the fuel is spilled on the device when filling, it has to
be removed before starting the engine.
Before changing the oil make sure that the cap of the
tank is closed, so no oil can go into the petrol tank.
Do not use the unit near open flames, flammable or ex-
plosive substances or gases, and flying sparks.
The engine should be at least one 1 m away from
house walls or other fixed facilities.
Make sure that all moving and rotating parts are
covered.
While the device works, the individual components
(e. g. the exhaust) become hot. Be careful when touch-
ing, because otherwise it may cause burns.
Operate in a safe environment and keep children away
from it while operating.
Operate on a straight and solid surface. On slopes the
device may leak fuel.
A larger inclination can have, even with full oil level,
negative influence on the gear.
Take care when transporting the device; make sure
there are no fuel leaks. We recommend that the tank is
emptied and the fuel inlet valve closed.
Before commissioning the device keep the following advice in mind:
Make sure that all fuel lines are connected and firmly attached, so that no leakage may occur.
Make sure that all screws and nuts are firmly tightened.
Check the fuel and oil level and if necessary, re-fill fuel or oil.
© by WilTec Wildanger Technik GmbH
Item 92400 and many more
Page 4
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1
