WilTec 62857, Operation Manual, Page: 5 / 5

© by WilTec Wildanger Technik GmbH Item 62857 Page 5
http://www.WilTec.de
http://www.aoyue.eu 01 2022-1
http://www.teichtip.de
Step 4
Turn the clamping devices by 180°,
too, to adapt them to the side where
the mirror will be installed.
Fixing the caravan mirror to the outside mirror
1. Before fixing the caravan mirror, make sure that the rubber straps are attached correctly.
2. Place the retaining flaps to the inner edge of the casing of the mirror and adapt the length to the
outer part of the casing of your outer mirror.
Maintenance and care
Only clean the mirror with a dry and smooth cloth. Should the mirror be quite dirty, use water and a mild
detergent. Do not use aggressive detergents or solvents; these products could damage the outer side
of the mirror. The mirror surface can be cleaned with any standard glass cleaning agent.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.