Technical specifications
Max. metal sheet thickness
(
㎜
)
0.8
Max. insertion depth
(
㎝
)
17.78
Insertion depth
(
㎝
)
0–17.78
Max. mounting surface thickness
(
㎝
) 5
Weight
(
㎏
)
22
Assembly (s. Fig. 3)
Base assembly group
Mount the base unit
(1–7)
in a suitable location on the workbench. The thickness of the mounting sur-
face must not exceed 5.08 cm (2”). Fasten the unit with the clamping handle
(4).
Mounting the beading machine on the base
Mount the beading machine casing
(18)
on the base
(1)
and secure it with a hexagon screw
(7).
Mounting the handle on the machine
Attach the hand crank assembly
(8–12)
to the drive shaft
(53).
Secure it with a hexagon head screw
(38–40, 60, 61).
Install the adjustment handle assembly into the upper body
(18).
Set the beading machine up on a level surface with sufficient lighting on a table or workbench.
Make sure to have enough space to turn the hand crank.
The area around the machine be free of debris, oil, or dirt.
The beading machine should be on a non-slip surface.
Commissioning (s. Figs. 2 and 3)
Be sure to keep your hands away from the dies when turning the crank. The machine can process a
maximum of 0.8 mm thick sheets. Below is a correspondence table for using the machine for other
materials.
Material
Thickness
(
㎝
)
Soft steel
0.76 (0.30”)
Stainless steel
0.58 (0.20”)
Cold-rolled steel
0.60 (0.24”)
Aluminium
1.39 (0.55”)
Soft brass
1.16 (0.46”)
Soft copper
1.16 (0.46”)
Hard copper
0.86 (0.34”)
© by WilTec Wildanger Technik GmbH
Item 62053
Page 5
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1