WilTec 61989 Operation Manual Download Page 3

Safety Instructions (A+B)

A-Electrical Connection Safety

Check whether your appliance and power cord are damaged before operating your appliance.

Check whether there is any crack, disjoint or scratch on the filament (heating tube). If any, contact
with your authorized technical service.

If you appliance or power cord is damaged, do not operate your appliance and return it to your
technical service.

Make sure that the main electricity circuit is 220-240V and 110-120V, 50-60Hz and the connec -
tion is fused.

Check the safety of the network. The fuse must be 25A.

Do not use your infrared heater together with another appliance plugged to the same multiple
sockets or connected to the same fuse.

Use your appliance with a properly earthed plug.

The earthed plug must fall outside heating field and hot surface.

The power cord must not be left on or around the frame of your infrared appliance.

Unplug your appliance when you won’t operate it for a long term or will conduct cleaning or main -
tenance.

The damaged heater glass must be exchanged.

If the cable of the heater should be damaged, this may be replaced only by the authorized ser -
vice.

If has to be notified that the mounting in the bath must be so that the persons in the bath can not
reach the controls.

It has to be notified that the product has to be installed at a dry location and may not be wet.

B-Safe distances required for installation on the wall, high temperature and fire protection

Attention! The appliance must only be operated in a horizontal position with max±15°slope. In
case of operations in angels larger than 5°in horizontal position or of vertical operations, the heat-
ing loop wire may fall into disuse shortly.

Never install your appliance on a combustible surface (carton etc.)

The distance of your appliance from the ground is to min 1.8 m (6 feet).

The distance of your appliance from the ceiling is to be min 0.7 m (2.5 feet).

The distance of your appliance from the living beings is to be min 1 m (3.5 feet).

The distance of heating area of your appliance from the materials such as wood, carton, cloth
etc., must be min 1 m (3.5 feet).

Do not cover your appliance and do not hang any clothing over the heater or do not place any
clothing on or near the appliance.

Do not stick anything into the protective grid.

Do not make use of your heater to light up cigarette or similar materials.

Supervision is needed when this product is used anywhere near children. The appliance is not in-
tended for use by children or other persons without assistance or supervision if their physical,
sensory or mental capabilities prevent them from using it safely.

Risk of Fire-keep combustible material such as furniture, papers, cloths, and curtains at least 0.9
m (3 feet) from the front of the heater and away from the sides and rear.

Warning-TO REDUCE THE RISK OF FIRE

1) Do not place any objects such as furniture, papers, cloths, and curtains at least 0.9m (3 feet) from

the front of the heater and away from the sides and rear when the heater is plugged in.

2) Do not place the heater near a bed because objects such as pillows or blankets can fall off the

bed and be ignited by the heater.

3)

Always unplug the heater if it is not being used.

© by WilTec Wildanger Technik GmbH 

Seite 3 

http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de

Summary of Contents for 61989









Reviews: