Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Warning:
Read carefully and understand all assembly and operating instructions before operating.
Failure to follow the safety rules and other basic safety precautions may result in serious personal in -
jury.
These 125 mm (5”), 200 mm (8”) and 300 mm (12”) plate shears are designed for certain applications
only. The manufacturer is not responsible for problems arising from the modification or use of these
products in an application for which they were not designed. We strongly recommend that these
products not be modified and/ or used for any application other than that for which they were de-
signed.
Intended use
The 125 mm (5”), 200 mm (8”) and 300 mm (12”) plate shears are suitable for shearing carbon steel
plate and can also be used to shear non-ferrous metals or plastic plate and bar.
Technical specifications
Item number
61577
61578
61579
Blade
Length
(mm)
approx. 125
approx. 200
approx. 300
Width
(mm)
6
Cutting capacity
Sheet metal and steel
(mm)
70 × 6
Round steel
(mm)
11
13
Weight
(kg)
10
18
25
Important safety information
Warning!
Read and understand all instructions. Failure to follow all instructions may result in serious in-
jury.
The warnings, cautions and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool.
Always be aware of the environment and ensure that the tool is used in a safe and responsible
manner.
Do not allow people to operate or assemble this product until they have read this manual and
have developed a thorough understanding of how the product works.
Do not modify the product in any way. Unauthorised modification may impair the function and/
or safety and could affect the lifespan of the product. There are specific applications for which
the product was designed.
Use the right tool for the job. Do not attempt to force a smaller tool to do the work of larger in-
dustrial tool. There are certain applications for which this equipment is designed. It will do the
job better and more safely at the capacity for which it was intended. Do not use this equipment
for a purpose for which it was not intended.
© by WilTec Wildanger Technik GmbH
Item 61577–61579
Page 3
http://www.WilTec.de
http://www.aoyue.eu
02 2021
-1