With LED
Caution!
This is only a brief description of how to set up the waterfall. Before installation, please en-
sure to have ready a suitable water pump, a water pipe, and other parts required for connecting.
For
cleaning, we recommend a microfibre cloth to protect the stainless steel from being scratched.
Assembly notes
Place the waterfall on the spot that you have chosen.
Make sure that the spot has a solid surface and enough space for the pump and hose connec-
tion.
Connect the waterfall to the pump.
If the waterfall has an LED light bar, this must be checked for its correct and firm seat. Install
the power cable out of the water and connect it to the transformer.
Align the waterfall as you wish it to be aligned, and fix it.
Check the water circuit for leaks, that should be sealed with hose clamps and sealing tape.
Switch on the pump (and, if present, the LED light) and put the waterfall into operation.
Special features of waterfalls equipped with LED light bar
The LED light bar is safely and reliably supplied with a 12 V AC transformer.
The LED light can be controlled with a remote control, that can switch to 17 different illumina-
tion patterns.
The waterfall and LED light bar are not pre-assembled at reception; however they can easily
be connected to each other.
© by WilTec Wildanger Technik GmbH
Item 61460–61473
Page 4
http://www.WilTec.de
http://www.aoyue.eu
04 2021
-1
