© by WilTec Wildanger Technik GmbH
Item 61202
Page 3
06 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
•
Perform a visual inspection of the device before each use. Do not use the device if parts are
damaged or worn. Never override safety mechanisms.
•
Consider the workspace environment. Protect the device from direct exposure to water.
•
Do not use power tools in humid or wet areas. Keep the working area well lit.
•
Do not use the tool with flammable liquids or gases.
•
Never use power tools in hazardous locations with paint, varnish, benzene, thinner, gases, ad-
hesives, and other flammable or explosive materials. Power tools may produce sparks during
operation.
•
Protection against electric shock: Avoid physical contact with earthed surfaces, e.g., pipes, ra-
diators, cooker plates, or refrigerators.
•
Keep children and all visitors away from the work area.
•
Keep unused tools safe when they are not in use. Tools should be stored in a dry and high or
locked place out of children
’s reach.
•
Make sure that the electrical connections are protected from moisture and flooding.
•
Wear hearing protection and safety glasses to protect yourself while working. If you work on
objects creating dusts, wear a dust mask.
•
Wear gloves to avoid losing control over the machine while working and use the insulated han-
dle surface.
•
Before working on the device or changing its equipment, switch the device off and pull the plug.
•
Make sure that the cable does not come into contact with the moving parts and lead the cable
away from the machine.
•
Never operate the device if the power cable is damaged. Visually examine the device before
each use. If the cable seems damaged, it needs to be replaced by a qualified technician.
•
Ensure that ventilation slots always remain clean and free.
•
Wear protective shoes when working.
•
Only use the device for its intended purpose.
•
Avoid unintentional starting. Do not carry the tool with your finger on the switch. Do not carry
the tool by its cable either.
•
Clamp moving workpieces down before working, to avoid slipping.
•
Do not touch the drill immediately after it has run. The drill will be hot and may cause burns.
Always check that the bits are firmly placed before starting the device up.
•
Before starting to demolish or chip a wall, floor or a ceiling, ensure that no items such as electric
cables or cable ducts are located in the area.
•
People with limited physical, sensory, or mental abilities or a lack of experience or knowledge
may not use the device unless they are supervised by a person responsible for their safety or
have received instructions on how to use the device.
•
Avoid unnatural posture. Make sure that you are always standing securely and are able to keep
your balance.
•
Always be attentive and focus on what you are doing.
•
Only use the demolition hammer with the additional handle. Loss of control of the equipment
may otherwise result in personal injury.
•
The demolition hammer has a hand-arm vibration of 13.717
㎧
². Take sufficient breaks to avoid
consequential damage caused by strong vibrations.
•
Never put the demolition hammer out of your hand when it is switched on.
•
Never point the demolition hammer at a person in the immediate surrounding. The tool can be
ejected and cause serious injury.
