
Step
7: Mounting the upper surface, the floor and the dividers
1. Place the upper surface onto the side panels and the back wall. Use the tapping screws to at-
tach it
(fig. 11).
2. Turn the cabinet around to attach the floor
(fig. 11).
3. Then push the divider slightly tilted into the cabinet. Place it vertically and fix it with the tapping
screws
(fig. 12).
Step 7 / Fig. 11
Step 7 / Fig. 12
Step
8: Mounting the doors
1. Place one of the the lower door hinges into the pre-drilled hole of the bottom rail. A plastic
washer needs to be placed on top of that
(fig. 13b).
2. Place the door on the bottom hinge.
3. Then adjust the door, ensure that the top hole of the door matches up with that of the cover
panel. Then attach the upper door hinge
(fig. 13).
Step 8 / Fig. 13b
Step 8 / Fig. 13
Step 9 / Fig. 14
© by WilTec Wildanger Technik GmbH
Item 60237, 60238
Page 10
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1