•
Place the top lock (A) over the mailbox (G) so that the holes match the appropriate drilling ho-
les.
•
Screw two screws (B1) into the drilled holes.
Secure the screws from the inside with two nuts (C).
•
Place the bottom lock (D) so that the holes match the appropriate drilling holes.
Screw two screws (B1) into the bored holes.
Secure the screws from the inside with two nuts (C).
Atta-
ching
the
flag
•
Place one washer (H) on the front and one on the rear of the flag (E).
•
Put the flag (E) in the appropriate drilling holes.
•
Screw the long screw (B2) into the top hole and the short screw (B1) into the bottom hole.
•
Secure the screws from the inside with two hexagon nuts (C).
© by WilTec Wildanger Technik GmbH
Seite 4
http://www.WilTec.de
http://www.aoyue.eu
November 2019 Version 7
