© by WilTec Wildanger Technik GmbH
Item 51552, 51553
Page 3
08 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
The submersible pump consists of a motor and a pump. Depending on the water level the float switch
can turn the pump on and off automatically. The thermal protection of the motor can automatically turn
the engine off if it is running too hot or overburdens itself, therefore security measures are kept in force
even in roughest conditions. The pump needs to be submerged entirely.
Operating conditions
1. The maximum depth to submerge the pump is 5 m seen from the middle of the rotor.
2. The temperature of the liquids being pumped through may not be above 40
℃
.
3. The pH level of the liquids being pumped may be between 4 and 10.
4. The kinematic viscosity of the liquids being pumped should be between 7×10
-7
and 23×10
-6
㎡
⁄
s
.
5. The maximum density of the liquids being pumped through is 1.2×1000
㎏
⁄
㎥
.
Safety instructions
CAUTION:
The use of this device is allowed on standing water bodies, garden ponds or swimming ponds and their
surrounding areas only with fault current protection-switch with a triggering nominal current up to 30 mA
(according to VDE 0100 Article 702 and 738).
The device is not suitable for use in swimming pools, paddling pools and other water bodies in which
during operation people or animals linger. The operation of the device during the stay of people and
animals in the danger zone is not allowed. Ask your electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised by
a person responsible for their safety or you follow the instructions made by this person how to use the
device correctly. Children should be supervised to make sure that they do not play with the device.
ATTENTION:
•
Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Use the device exclusively according to the intended purpose stated in the instructions for use.
•
You are responsible for the safety of the working environment.
•
If the cable or the plug is damaged because of external influences, the cable must not be re-
paired, but must be replaced with a new one. This work can be carried out only by an electrician.
•
The voltage indicated on the type plate of the device of 230 V AC has to correspond to the
existent mains voltage.
•
Never lift, carry or fix the device by using the power cable.
•
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
•
Before working on the garden pump, disconnect the appliance by taking the plug out of the
socket.
•
Avoid exposing the pump to a direct water jet.