WilTec 50976 Operation Manual Download Page 7

remains waterproof also by high pressure 

water delivery 3 m height (dependent on pump output which is connected)

easy installation and maintenance of the filter 

WilTec pond filter functions

The WilTec pond filter clarifies the water in 3 phases:
 

1. The first stage is 

mechanic. 

The visible particles of dirt are removed by means of a 3-layer fil-

ter foam, arranged from coarse to fine.

2. The second stage is 

biologic. 

With the help of the so-called bio-balls (depending on model)

the settling of bio-organisms is stimulated. These bio-organisms remove the organic compon-
ents from the pond water (depending on model).

3. The third stage comprises a  

UVC water treatment.  

The UV light destroys swimming algae

and germs. The result is healthy water.

 

Commissioning

The pressure filter should be placed at least at a 2-meter distance from the pond edge. The
water outlet back to pond should be placed max. 2 m over the filter cover (0,2 bar water pres-
sure!).

The pump must be started first. The UVC lamp must not be operated as long as no water
flows through it. Do not use the UVC lamp if the lamp or the connections show damage signs.
Do not use the UVC-filter if there are people inside the water.

The built-in UV filter temperature sensor stops the UVC lamp. After cooling down, it is auto -
matically re-started.

The WilTec filter is delivered with all the necessary filter mats. Carefully wash the filter mats
with pond water before using. The bio-balls (depending on model) are placed at the bottom of
the filter, above put the grating with the protective tube for the UVC unit. Then put the filter
foam layers on it, arranged from fine to coarse. Put the cover lid on the housing and close the
filter with the supplied cramping bracket.

If properly installed, the filter is waterproof up to a 0,5 bar working pressure. The power supply
has to be equipped with an earth leakage circuit breaker that does not exceed 30 mA.

© by WilTec Wildanger Technik GmbH Item 50105, 50123, 50977–50980, 50121, 51042–51044

Page 7 

http://www.WilTec.de
http://www.aoyue.eu

 

04 2021

-1

http://www.teichtip.de

Summary of Contents for 50976
















Reviews: