© by WilTec Wildanger Technik GmbH
Seite 9
http://www.wiltec.info
6. If a smaller screw is being used(M4,M5 or M6), please use a washer with each screw for added
stability.
Final Installation
Attach each bracket to the display by aligning the holes on each bracket,
with the threaded inserts on the back panel of your display, inserting the
screws through both and turning clockwise until they are fully inserted.
1. Tighten with a Phillips head screw driver.
CAUTION:
Two people are required for this step.
2. To complete the installation of your new plasma mount, carefully
place the television brackets over the upper and lower mounting
crossbars.
3. Making sure that the lockable screw is not in place when placing the
television on the mount.
Operation and Adjustment
1. sYour new mount can be adjusted to fit your individual needs.
2. You can adjust the tilt of your television by using the tension knob
located on the right-hand side and left-hand side of the TV brackets.
3. Next, turn the tension knobs counter-clockwise to loosen
the mounting crossbars.
4. To tilt the mount up, press the right knob as you pull on the
lower part, while at the same time pushing on the upper
crossbar to tilt the mount to the position you want, then
release the knob and push slightly until it locked.
5. To tilt the mount down, press the right knob as you pull on
the upper crossbar, while at the same time pushing on the
lower crossbar to tilt the mount to the position you want,
then release the knob and push slightly until it locked.
6. Once the desired level of tilt is achieved, retighten the
mount by turning the tension knobs clockwise.
7. Other feature of your display mount is the lock designed to prevent your television from being
removed from the crossbar.
8. To use the security function, you only need to thread the screws under the TV brackets till it
locked the bracket tightly.
All manuals and user guides at all-guides.com