https://www.XPOtool.com
Item 34246
Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety precautions
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal current
up to 30
mA (according to VDE 0100
Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities, or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or the follow the instructions, made by this person on how to use
the device correctly. Children should be supervised to make sure that they do not play with the device.
CAUTION:
•
The compressor head (with cooling fins) can get very hot.
•
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Use the device exclusively according to the intended purpose stated in the manual.
•
You are responsible for the safety of the working environment.
•
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work can only be carried out by an electrician.
•
The 230
V alternating voltage indicated on the type plate of the device must correspond to the
existent mains voltage.
•
Never lift, carry, or fix the device by using the power cable.
•
Make sure that the electrical plug connection is protected from flood and moisture.
•
Disconnect the mains plug before starting the maintenance work at the compressor.
•
The user is responsible for complying with the location specific safety and mounting regulations.
Ask an electrician, if necessary.
•
In case of device failure, the repairs can only be carried out by an electrician.
NOTES:
•
The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
•
Never expose the device to dust, acid, steam, explosive or flammable gases, or atmospheric
influences (rain, sun, fog, snow).
•
The vacuum pump can be operated only in an appropriate environment (good ventilation, am-
bient temperature of +5–+40
℃
).
•
Never use the compressor barefoot or with wet hands or feet.
•
Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
•
Do not open or damage any compressor part. If necessary, please contact your seller.
•
Always release the water by opening the drain valve before not using the compressor for a long
time. Store the compressor in a well-ventilated place.
•
Always wear goggles. Under no circumstances direct the airflow towards your body or other
persons’ bodies or animals.
•
Never use the device in areas with steam or moisture or close to water.
•
Switch off the compressor if you do not use it. Disconnect it from mains before you repair, re-
condition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the
