© by WilTec Wildanger Technik GmbH
Item 34220, 34251, 34259–34263
Page 4
02 2022
-1
•
If thrown, dropped, or exposed to pressure or tension, the device might malfunction or not func-
tion properly.
•
Never place the device near (highly) flammable material such as curtains.
•
Always make sure that the rotary disc that the workpiece is placed onto is centred.
•
After every use, the device must remain switched on for another 2–6
min to ensure self-clean-
ing.
•
Switch off the device and pull out the plug when the device is not in use.
•
If contaminated by large amounts of paint, the filter cannot function properly any longer and
must be replaced by a clean one.
•
To avoid damages to your health, never apply toxic, flammables, or explosive paints or material.
•
Always ensure sufficient ventilation of your work zone.
•
In commercial facilities, the accident prevention regulations of the competent professional as-
sociation must be observed.
•
In schools, educational establishments as well as hobby and self-help workshops, the use of
the device must be responsibly supervised by trained personnel.
•
If you have reason to believe that safe operation is no longer possible, immediately disconnect
the device from the power supply and secure it against unintentional restart.
•
The safety of operation of the device cannot be ensured any longer if
◦
it is visibly damaged,
◦
it does not operate any longer,
◦
it has been stored under unfavourable conditions or
◦
has been treated roughly during transport.
Properties
•
The suction system is foldable, light, and needs little space.
•
It operates at a low power consumption and high airflow, does not need an exhaust hose, saves
•
energy, and protects the environment.
•
It is equipped with a close-mesh filter that removes nearly all paint and liquid particles without
pollution the environment.
•
The cable and plug are in the inside of the device and can be pulled out if necessary; you can
have them retracted and rolled up at the push of the corresponding button.
•
With completely transparent chamber, two chambers being combinable for large workpieces if
needed.
•
The device has an on/off switch with a diode that is lit when the device itself is switched on.
Quiet operation at 52 dB only.
•
The system has a rotary disc that allows easy handling.
Technical specifications
Item number
34220
34251
34259
34260
34261
34262
34263
Power supply
100–240
V / 50/60
Hz
Input current
12
V (direct current) / 1.5
A
Air flow
(
m³
⁄
min
)
3
4
6
8
8
4
4
Noise level
(dB)
approx. 52
Dimensions
of one de-
vice
(
㎜
)
opened
420 × 240 × 150
folded
400 × 200 × 30
Weight
(
㎏
)
4.5
4.5
9
9
9
7
7
