•
Never operate the compressor unless all guards (e.g. guards, belt guards, safety valve) are
properly installed. If maintenance or repair work necessitates the removal of the guards, make
sure that they have been properly reattached before restarting the compressor.
•
Never place your hands, fingers or any other parts of your body near moving parts.
Work with compressed air and blow guns
•
Compressors and lines reach high temperatures during operation. Avoid touching these parts
as this can cause burns.
•
The air sucked in by the compressor must be kept free of gases, vapours and mixtures, which
can lead to fire or explosion in the unit.
•
When releasing the hose coupling, be sure to hold the hose coupling piece to avoid injury from
the hose coming out.
•
Always wear protective glasses when working with the blow gun. Blown foreign bodies and
particles can easily cause injuries.
•
Never point the blow gun at persons.
•
Never clean clothes on the body with the blow gun.
Working with paint sprayers
•
Do not use varnishes or solvents with a flash point of less than 21°C.
•
Never heat solvents or paints.
•
When processing liquids that are harmful to the health, filter devices such as face masks are
required for protection. Please observe the information on further protective measures
provided by the manufacturer of these substances.
•
Do not smoke in the entire working area during the spraying process. Paint vapours are highly
flammable.
•
Paint vapours are harmful to health. Therefore do not store or consume any food or drinks in
the work area.
•
Note that the working area must be more than 30 m³. Sufficient air circulation during spraying
and drying is absolutely necessary.
•
PVC hoses must not be used with liquids such as white spirit, butyl alcohol or ethylene chlor-
ide, as this can lead to a reduced service life of the compressed air hose.
•
Ensure that the intake air is clean, dry and dust-free.
•
Do not place the compressor in a wet or humid room.
Assembly
Take the compressor out of its packaging and check that it is in good condition. The unit must not
have suffered any transport damage. Do not operate the unit if it is damaged and contact the manufac-
turer.
© by WilTec Wildanger Technik GmbH
Item 61957
Page 5
http://www.WilTec.de
http://www.aoyue.eu
12 2020-1
