IN-BUILDING CELL SIGNAL AMPLIFIER
ENTERPRISE 1300 & 1300R
16
Warnings
To uphold compliance with network protection standards, all active cellular devices must maintain at
least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics product may
damage your equipment.
The Signal Amplifier unit is designed for use in an indoor, temperature-controlled environment
(operating temperature ranges from -40°C to 60°C – -40°F to 140°F). It is not intended for use in attics
or similar locations subject to temperatures in excess of that range.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground.
This is a CONSUMER device.
BEFORE USE
, you
MUST REGISTER THIS DEVICE
with your wireless provider and have
your provider’s consent. Most wireless providers consent to the use of signal boosters.
Some providers may not consent to the use of this device on their network. If you are
unsure, contact your provider.
In Canada,
BEFORE USE
you must meet all requirements set out in ISED CPC-2-1-05.
You
MUST
operate this device with approved antennas and cables as specified by the
manufacturer. Antennas
MUST
be installed at least 20 cm (8 inches) from (i.e.,
MUST NOT
be installed within 20 cm of) any person.
You
MUST
cease operating this device immediately if requested by the FCC (or ISED in
Canada) or licensed wireless service provider.
WARNING
. E911 location information may not be provided or may be inaccurate for calls
served by using this device.
This device may be operated
ONLY
in a fixed location (i.e..may operate in a fixed location
only) for in-building use.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR
WIRELESS PROVIDER, PLEASE SEE BELOW:
Sprint:
http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS:
https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless:
http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T:
https://securec45.securewebsession.com/attsignalbooster.com/
U.S. Cellular:
http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05,
SEE BELOW:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
Safety Guidelines
