Need help?
www.wilsonelectronics.com
Tech Support 866-294-1660
Mon.- Fri. 6 am to 7 pm MST Sat.- Sun. 8 am to 5 pm MST
4
Installing the (Optional)
Mounting Plate
To purchase a mounting plate contact
Wilson Electronics Sales Team
435-673-5021.
1.
Remove two screws from back of
Signal Booster that correspond with
the mounting plate.
(PN #
901138)
2.
Place Signal Booster on mounting
plate and reinstall the two screws
previously removed from back of
Signal Booster.
Caution:
Do not remove “Void
Sticker.”
MOUNT
TO WALL
SURFACE
2.
Select a location to install the Signal
Booster that is away from excessive
heat, direct sunlight, moisture and
that has proper ventilation. Do not
place the Signal Booster in an
air-tight enclosure.
3.
Run the Outside Antenna cable to
the Signal Booster and attach it
to the connector labeled “Outside
Antenna.”
From Cellular
Device
Power
Adapter
From Outside
Antenna
4.
An external adapter may be needed
to connect the cellular device to
the Signal Booster. The external
adapter plugs into the included
antenna extension cable and directly
into a socket on the cellular device.
Run the extension cable from the
external adapter and attach it to the
connector labeled “cell phone or
data card” on the Signal Booster.
Note:
Be careful when plugging
the connector in so as not to bend
the center pins on the connectors.
Ensure all cables have a tight
connection.
5.
Before powering up the Signal
Booster verify that connections
are tight. An AC surge protector is
recommended for all installations
(not included).
From Cellular
Device
Power Adapter
From Outside
Antenna
