Wilson Electronics Mobile 4G SmarTech III 460108 Manual Download Page 2

2

Need help?

www.WilsonElectronics.com

Tech Support  866-294-1660

Mon.- Fri. Hours: 7 am to 6 pm MST

!

!

 THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER 

WILL ADJUST TO THE TEMPERATURE OF ITS 

ENVIRONMENT, BUT IS DESIGNED TO PROTECT THE 

SIGNAL BOOSTER TECHNOLOGY. FOR EXAMPLE, IN THE SUMMER, 

THE SIGNAL BOOSTER CASE MAY BE AS HOT AS 150 DEGREES 

INSIDE YOUR VEHICLE. THESE HIGH TEMPERATURES WILL NOT 

DAMAGE THE SIGNAL BOOSTER, NOR DO THEY POSE A FIRE 

RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL 

BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND AWAY 

FROM DIRECT SUNLIGHT OR MOISTURE. 

THE MOBILE 4G SIGNAL BOOSTER 

MAY REMAIN ON, IN VEHICLES 

WHOSE 12V DC POWER SOURCES 

DO NOT AUTOMATICALLY SHUTDOWN WHEN THE 

VEHICLE IS TURNED OFF. THIS COULD RESULT IN 

DISCHARGING THE VEHICLES BATTERY IN ONE 

TO TWO DAYS.

Installation Instructions for the Following Wilson Electronics Signal Boosters:

Mobile 4G SmarTech 

 Signal Booster

Model # 460008    FCC ID: PWO460008

Contents

Package Contents

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Before Getting Started

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Troubleshooting & Understanding Lights

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Additional FAQ

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Outside Antenna Options

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Signal Booster Specifications

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 

Safety Guidelines

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Guarantee and Warranty

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover 

Summary of Contents for Mobile 4G SmarTech III 460108









Reviews: