![background image](http://html1.mh-extra.com/html/wilson-electronics/iden/iden_installation-manual_983401003.webp)
2
Installation Instructions for the Following Wilson Amplifi ers:
Mobile Wireless Single Band Amplifi er
Model #804002
FCC ID: PWO806W V
IC: 4726A-806W V
The term “IC” before the radio certifi cation number only signifi es that
Industry Canada technical specifi cations were met.
Inside this Package
How it Works
Your new Wilson amplifi er has been carefully engineered to signifi cantly improve the
performance of your cell phone or cellular data card in mobile applications. Together with
an outside antenna (sold separately), the amplifi er’s state-of-the-art technology is designed
to increase your signal up to 10 times, reduce disconnects and dropouts, and increase data
communication rates needed for 3G technologies.
The outside antenna will collect the cell tower signal and send it through the cable to the
amplifi er. The signal is then boosted and sent to the inside antenna. Your cell phone or
data card then communicates with the improved signal. When the cell phone or data card
transmits, the signal goes through the inside antenna, is boosted by the amplifi er and
broadcast back to the cell tower through the outside antenna.
Wilson Electronics manufactures a wide variety of antennas to help you customize your
amplifi er for your specifi c application. Several are shown below. See your dealer or visit
www.wilsonelectronics.com.
Before Getting Started
Wireless
amplifi er
DC plug-in
power cable
NMO
Mount
Magnet
Mount
Trucker
Mount
Mini
Magnet
Marine
Antenna
Low-profi le
antenna
NOTE:
Use of this amplifi er with an
antenna gain higher than 5.12 dBi
is in violation of FCC regulations
for which the offender is fully
liable. All Wilson mobile
antennas are 5.12 dBi or less
in the 800 MHz band.