Wilson Electronics 801102, Installation Manual

Page: 5 / 8

4 5
AMPLIFIER LAYOUT
KEEP A SEPARATION DISTANCE OF AT
LEAST 20ft HORIZONTAL AND 5ft VERTI-
CAL BETWEEN ANTENNAS
If using the Yagi Antenna, make sure the Yagi
is pointed AWAY from the inside antenna.
�����
����� ������
���������
������ ������� ��
��������� ����������
����
����
��������
��������
�����
������� �������
�������� ����
������� �����
������� ������� ��
��������� ����������
������ �������
��������
�������
������� �����
AMPLIFIER SPECIFICATIONS FOR iDEN 43dB, 50dB & 60dB MODELS
Part #: 804001 (43dB Model) & 804003 (50dB Model) & 804004 (60dB Model)
43dB 50dB 60dB
Frequency 806-821MHz Uplink 851-866MHz Downlink
Gain (up/down) (43dB/43dB) (50dB/50dB) (60dB/60dB)
Flatness (up/down) (+/- 4dB/+/-4dB) (+/- 4dB/+/-6dB) (+/- 4dB/+/-6dB)
Max RF (up/down) (+31.7dBm/+10dBm) (+31.7dBm/+10dBm) (+31.7dBm/+10dBm)
Noise Figure (down) (3dB nominal) (3dB nominal) (3dB nominal)
Isolation Uplink/Downlink More than 90dB
Power Consumption 13.8V, 1.5A
AMPS
/
iDEN AMPLIFIER PHYSICAL
SPECIFICATIONS
Connectors FME-Male 50 Ohms
Dimensions 5.5x4.3x1.4 (inch) or
14.0x10.8x3.5 (cm)
Weight 1.32 Pounds or 600G