background image

3301 East Deseret Drive, St. George, UT 

 

866.294.1660

     

www.

weboost

.com

   

 

support.

weboost

.com

Copyright © 2017 Wilson Electronics. All rights reserved.
Wilson Electronics products covered by U.S. patent(s) and pending application(s)
For patents go to: weboost.com/us/patents

NOT AFFILIATED WITH WILSON ANTENNA

GDE000030_Rev01_11-02-17

 

2 YEAR WARRANTY

Wilson Electronics Signal Boosters are warranted for two (2) years against defects in 

workmanship and/or materials.  Warranty cases may be resolved by returning the product 

directly to the reseller with a dated proof of purchase.  

Antennas may also be returned directly to the manufacturer at the consumer’s expense, 

with a dated proof of purchase and a Returned Material Authorization (RMA) number 

supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or 

replace the product. Wilson Electronics will pay for delivery of the repaired or replaced 

product back to the original consumer if located within the continental U.S.

Replacement products may include refurbished Wilson Electronicst products that have 

been recertified to conform with product specifications.

This warranty does not apply to any antennas determined by Wilson Electronics to have 

been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical 

or electronic properties.

RMA numbers may be obtained by contacting Technical Support at 866-294-1660.

DISCLAIMER: The information provided by Wilson Electronics is believed to be complete and accurate. 
However, no responsibility is assumed by Wilson Electronics for any business or personal losses arising 
from its use, or for any infringements of patents or other rights of third parties that may result from its use.

Summary of Contents for 4G Low-Profile Dome Antenna













Reviews: