Wilson Electronics 460001 Installation Instructions Manual Download Page 12

12

Need help?

www.WilsonElectronics.com

Tech Support  866-294-1660

Mon.- Fri. Hours: 7 am to 6 pm MST

Additional FAQ: 

What hours can I contact tech support? 

Technical Support can be reached from 7:00am 
to 6:00pm MST, by calling (866-294-1660), or by 
email, at [email protected]

How does weather affect the performance of 
my Outside Antenna?

Water vapor (e.g. rain, fog, snow or other 

SUHFLSLWDWLRQFUHDWHVDQHIIHFWLYH¿OWHUWRFHOOXODU

signal.  In times of heavy precipitation, you may 
see less performance.

What’s the difference between the 800 MHz 
and the 1900 MHz bands? How do I know 
which MHz band my cell phone uses?

The DT4G works with all major North American 
cellular providers on the 800 & 1900 MHz 
frequencies.  Traditionally, 800/1900MHz are 
associated with voice and 3G data; while 700MHz 
and 1700/2100MHz are associated with 4G data. 
For more detail, refer to wirelessadvisor.com

Lightning

Surge Protector

(sold separately)

To Outside

Antenna

To Signal Booster

Ground Wire

(not included)

!

RECOMMENDED: INSTALLING THE LIGHTNING SURGE PROTECTOR 

(SOLD SEPARATELY)

INSTALL THE LIGHTNING SURGE PROTECTOR (LSP) CLOSE TO THE SIGNAL 
BOOSTER. ATTACH THE CABLE FROM THE OUTSIDE ANTENNA TO THE 
SURGE PROTECTOR. 

ENSURE THE LSP IS PROPERLY GROUNDED

.

  

#859992-75 OHM MAY BE PURCHASED AT 

WWW.WILSONELECTRONICS.COM

 

OR BY CALLING 800-204-4104.

Why do I need to maintain at least 20 feet of 
separation, but no more than 50 feet? OR 
Why do I need to create so much distance 
between the antennas?

Antennas connected to a booster create a sphere 
of signal.  When these sphere’s overlap, a 
condition called oscillation occurs.  This oscillation 
can be thought of as noise, which causes the 
booster to shut down to prevent damage from 
occurring.  The best way to keep these spheres 
of signal from creating noise is to maintain 
separation between your inside and Outside 
Antennas.  However – as any cable has loss, 
we recommend that you try to minimize the total 
separation to keep within the range of 20-50 feet.

United States Carrier Frequency Use

We recommend visiting www.wirelessadvisor.
com for information regarding the frequency band 

XVHGE\\RXUFHOOVHUYLFHSURYLGHULQDVSHFL¿F

geographical location.

Summary of Contents for 460001

















Reviews: