2
Select a location for mounting the antenna. The best location would be
centered on the vehicle roof, although other locations are acceptable.
For mounting the antenna on the trunk of a vehicle, use Wilson Part #
901101. Slide the bracket into place on the trunk or hood lip. Tighten the
two set screws on the bottom lip underneath the trunk or hood lip.
For roof mounts, Wilson part # 901102 or #901103, drill a hole in the
selected location. The size of the hole should be 3/8” or 3/4” depending
on the mount purchased. Place the NMO mount up through the bottom
of the hole. Place the threaded nut on top of the mount, outside of the
vehicle and tighten.
Route the cable between the hole or the mount, and the location of the
amplifi er or the cell phone.
Screw the antenna coil into place on top of the vehicle.
1
1
22
33
44
55
Installing the NMO Mount Antenna
