background image

The Centre Square is a low profile, 2.5-way speaker. It 
delivers a huge amount of energy from an elegant and 
very discrete enclosure. This critical component in any 
system must exhibit the lowest possible level of noise.

To achieve this objective we have deployed an array of 
metal systems. Internally, critical mass damping pads 
break up standing waves and defeat the onset of panel 
resonance.

As the rear wall forms an intrinsic part of this design, the 
two A.B.R.s in this case, are located in the side of the 
enclosure. Both the mid range, and bass driver, benefit 
from the A.B.R.

The Centre exhbibits excellent dynamics and the most 
coherent time alignment thanks to the high performance 
mid range drive unit which has no crossover and the 1st 
order tweeter. The Centre presents every subtle detail of 
dialogue with ease. Like all the Square Series, the Centre 
is fitted with identical drive units to the Odyssey Range, 
so the potential for mix and match is possible without 
any compromise.

The Centre is finished in a beautifully handcrafted range 
of veneers with an optional laser cut steel wall mount or 
stand mount available for the ultimate solution.

Specifications

Description

2.5-way, stand mounted Centre channel loudspeaker

Drive units

1 x 170mm (7”) Wilson Benesch Tactic I Mid range unit 
1 x 170mm (7”) Wilson Benesch Tactic I Bass unit
1 x 25mm (1”) Soft dome, Wilson Benesch specification 
tweeter

Low Frequency Loading

Assisted Bass Radiator / Bass Ports
 

Frequency response

 

43Hz - 24KHz +/- 2dB on axis

Sensitivity

 

87dB spl at 1metre on axis. 2.83V input

Impedance

6 Ohms nominal, 4 ohms minimum

Crossover  

First Order tweeter crossover 
First Order Bass roll-off
Selected polypropylene capacitors and air cored 
inductors

Crossover Frequency

 

5 KHz, 500Hz
 

Internal wiring

Hand-made loom comprised of Multi stranded military 
specification silver plated copper with PTFE jacket soldered 
connections throughout.
 

Input connections

Bi-wireable, in house machined rhodium plated copper 
alloy terminals
 

Maximum spl

 

118dB at 1 metre

Power handling

200W peak unclipped programme

Dimensions

Height  210mm (8.2”)
Width  790mm (31.1”)
Depth  200mm (7.9”)
Internal Volume  16 Litres
Net Weight 

18 kg / 40 lbs or 30kg / 66 lbs with stand 

Finishes Available

Gloss Wood Finishes: Piano Black, White, Red Tulip, Red 
Birds Eye, Birds Eye  Maple, Burr Walnut, Ebonised Walnut, 
Walnut, Zebrano

Satin Wood Finishes: Natural Cherry, Maple, Oak
 
 

10

Centre

Square Five

Summary of Contents for Square One Series ii













Reviews: