WILSON AUDIO Thor's Hammer, Owner'S Manual

Page: 15 / 48

s
e C T i o n
2 . 1 – P
r e P a r a T i o n
15
W i l s o n A u d i o S p e c i a l t i e s
Section 2.1 – Preparation
You will need the following items:
• Supplied hardware kit
• Known listening position
• Electric screwdriver
• Phillips head drive bit
Uncrating the Thor’s Hammer
A minimum of two strong adults are required to set up the Thor’s Hammer. The
Thor’s Hammer weighs over four hundred pounds, and care should be taken to prevent
injury.
1. With the crate lid facing up, unscrew the wood screws securing the lid.
Remove the lid. Remove the foam packing material that is positioned be-
tween the casters (on the bottom of the Thor’s Hammer). The Thor’s Ham-
mer will not roll out of the crate with this packing material in place.
2. Carefully rotate the crate so that the Thor’s Hammer is upright.
3. While one person holds the crate, another person should gently roll the
Thor’s Hammer out of the crate. Be careful not to scratch the sides of the
painted enclosure.
4. Move the Thor’s Hammer into the desired location. It is recommended
that you leave the casters attached to the bottom of the Thor’s Hammer
during the positioning process.
Note: Be careful not to touch the driver elements when you are moving your Thor’s
Hammer!
15